HOT 7 Pro Clone Flash Firmware File Android 9.0 ALPS.L1.MP6.V2_WEG.L_P73

Google+ Pinterest LinkedIn Tumblr +

Video is ready, Click Here to View ×

BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait……
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM50)
Build ID: LMY47I
Display ID: l600v10_txd_x5_CED_hot7_480x960_en_yl_v09
Version: 9.0
Model: HOT 7
Brand: Android
Device: HOT 7
Manufacturer: Android
Mediatek Version Release: ALPS.L1.MP6.V2_WEG.L_P73
FRP partition: /dev/block/platform/mtk-msdc.0/by-name/frp
Region: US
This phone have FRP partition.
IMEI[1]: 35xxxx
IMEI[2]: 35xxxx
Wait untill phone will start charging.
[0]All done.

Scanning for presents meta ports…
Phone must be off with battery inside.
Please insert USB cable now…
In some phones need to keep VOL- button untill inserting USB cable.
[31]Detected: MediaTek PreLoader USB VCOM_V1632 (Android) (COM31)
\?usb#vid_0e8d&pid_2000#6&236cc9f3&0&8#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait…
Restarting to meta,wait….
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[107]META Port Detected: MediaTek USB VCOM (Android) (COM107)
USBVID_0E8D&PID_20076&236CC9F3&0&8
Start sync target, waiting responce…..
ChipID: MT6580,S01
Using Algo 1.
Brand: Android
Board: unknown
Model: HOT 7
Name: HOT 7
Release: l600v10_txd_x5_CED_hot7_480x960_en_yl_v09
Version: 9.0
Mediatek Version: ALPS.L1.MP6.V2_WEG.L_P73
Branch: L1.MP6
Platform: MT6580
Reading imei
IMEI[1]: 35xxxx
IMEI[2]: 35xxxx
Modem Version: WR8.W1449.MD.WG.MP AEON6580_WE_L_H
[0]All done.

Share.

About Author

Comments are closed.